Color: olive-gray. Inscription on the wall: "IGNITOR TIME BLASTING FUSE WATERPROOF M60". The M60 igniter is designated in various nomenclatures as follows: - Nomenclature "Product designation" (Model designation) - M60. - Nomenclature "Department of Defense identification code (DODIC)) - M766 - National Stock No. (National Stock No (NSN)) -1375-00-691-1671 - UN Serial number (code) - 0029.
For igniting ignition tubes made of M700 fire-conducting cord, detonator capsules of type M7 and J-1, as well as for igniting the M14 ignition tube. - Provides high tightness of the connection point with the cord, which allows it to be used in any weather conditions (except sub-zero temperatures). - It is not recommended to use M60 with the old cord model (Safety fuse) due to difficulties with sealing.
The base is a nylon tube with threads at both ends. The upper and lower caps are screwed onto the threads. - Inside the tube are located: - Impact mechanism. - Igniter capsule. - Collet clamping device for fixing the fire-conducting cord - An extractor rod is brought out from the top of the capsule, to which an elastic striker (from below) and an extractor ring (from above) are attached. - To prevent accidental triggering, a safety pin with a rope is threaded through the holes in the cap and rod. - In the transport position, the lower hole is closed with a plastic plug. Packaging - 5 igniters in a cardboard box wrapped in a sealing cover. 60 boxes are placed in a wooden unpainted box (300 igniters) with standard marking. Box weight 16.6 kg. Dimensions 44.52 x 21.15 x 49.6 cm.
- To connect the cord, unscrew the lower cap, insert the cord into the end of the igniter and screw the cap back. The collet mechanism tightly clamps the cord, ensuring tightness. - To ignite, remove the safety pin and pull the extractor rod along the axis of the igniter upwards. In this case: - The rod pulls the striker along with it, compressing the spring. - In the upper part of the tube, the spacer ring spreads the split tube of the striker, and separation from the extractor rod occurs. - The striker, under the action of the spring, moves sharply downwards and hits the primer-igniter, causing a flash that ignites the ignition cord.
Color: olive-gray. Inscription on the wall: "IGNITOR TIME BLASTING FUSE WATERPROOF M60". The M60 igniter is designated in various nomenclatures as follows: - Nomenclature "Product designation" (Model designation) - M60. - Nomenclature "Department of Defense identification code (DODIC)) - M766 - National Stock No. (National Stock No (NSN)) -1375-00-691-1671 - UN Serial number (code) - 0029.